PD Series
SKU PD525S
The PD525S is a high power low frequency loudspeaker comprised of two 380mm (15 in) Dual Coil - Dual Gap Differential Drive low frequency drivers in a front-loaded, vented configuration.
| Overview | |
|---|---|
| |
| Specifications | |
| Size | 15" |
| Specifications | |
| Frequency Range (-10 dB) | 28 Hz to 3.8 kHz |
| Frequency Response (±3 dB) | 40 Hz to 1.1 kHz |
| Transducer Power Ratings (AES) | 2000W (8000W peak), 2 hrs |
| System Power Rating | 1000W, 100 hrs |
| Sensitivity | 102 dB (avg 40Hz-1kHz) |
| Maximum SPL (1m) | 135 dB cont (141 dB peak) |
| Input Modes | Drivers Parallel / Drivers Discrete |
| Nominal Impedance | 4 ohms in parallel-drive mode, 2 x 8 ohms in discrete drive mode |
| LF Driver | 2 x JBL 2275H 380mm (15 in) Dual Coil - Dual Gap Differential Drive drivers with 75mm (3 in) voice coils |
| Enclosure | Trapezoidal with 10 degree side angles, 18mm exterior grade 11-ply Finnish birch plywood |
| Suspension Attachment | 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts not included) |
| Finish | Black DuraFlex finish; white (-WH) available upon request |
| Optional Weather Resistant Versions | WRC for sheltered outdoor placement; WRX for direct exposure or extreme environments (tropical/beach/salt air/humidity/temperature swings) |
| Grille | Powder coated 14 gauge perforated steel, acoustically transparent backing |
| Input Connectors | CE-compliant covered barrier strip terminals, accepts up to 5.2 sq mm (10 AWG) wire or max width 8mm (0.315 in) spade lugs |
| Environmental | IP55C per IEC 529 |
| Optional Accessories | 229-00009-01 kit of three M10 x 35mm forged shoulder steel eyebolts |
| Nominal LF Driver Impedance | 4 ohms in parallel-drive mode, 2 x 8 ohms in discrete drive mode |
| Dimensions (H x W x D, vertical orientation) | 782 x 783 x 670mm (30.8 x 30.8 x 26.4 in) |
| Net Weight (each) | 53.4 kg (118 lb) |
| Additional Specifications | |
| Configuration | Subwoofer |
| Mounting Information | |
| Net Weight | 53.52 kg / 118 lbs |
| Overview | |||
|---|---|---|---|
| |||
| Specifications | |||
| Size | 15" | ||
| Specifications | |||
| Frequency Range (-10 dB) | 28 Hz to 3.8 kHz | Suspension Attachment | 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts not included) |
| Frequency Response (±3 dB) | 40 Hz to 1.1 kHz | Finish | Black DuraFlex finish; white (-WH) available upon request |
| Transducer Power Ratings (AES) | 2000W (8000W peak), 2 hrs | Optional Weather Resistant Versions | WRC for sheltered outdoor placement; WRX for direct exposure or extreme environments (tropical/beach/salt air/humidity/temperature swings) |
| System Power Rating | 1000W, 100 hrs | Grille | Powder coated 14 gauge perforated steel, acoustically transparent backing |
| Sensitivity | 102 dB (avg 40Hz-1kHz) | Input Connectors | CE-compliant covered barrier strip terminals, accepts up to 5.2 sq mm (10 AWG) wire or max width 8mm (0.315 in) spade lugs |
| Maximum SPL (1m) | 135 dB cont (141 dB peak) | Environmental | IP55C per IEC 529 |
| Input Modes | Drivers Parallel / Drivers Discrete | Optional Accessories | 229-00009-01 kit of three M10 x 35mm forged shoulder steel eyebolts |
| Nominal Impedance | 4 ohms in parallel-drive mode, 2 x 8 ohms in discrete drive mode | Nominal LF Driver Impedance | 4 ohms in parallel-drive mode, 2 x 8 ohms in discrete drive mode |
| LF Driver | 2 x JBL 2275H 380mm (15 in) Dual Coil - Dual Gap Differential Drive drivers with 75mm (3 in) voice coils | Dimensions (H x W x D, vertical orientation) | 782 x 783 x 670mm (30.8 x 30.8 x 26.4 in) |
| Enclosure | Trapezoidal with 10 degree side angles, 18mm exterior grade 11-ply Finnish birch plywood | Net Weight (each) | 53.4 kg (118 lb) |
| Additional Specifications | |||
| Configuration | Subwoofer | ||
| Mounting Information | |||
| Net Weight | 53.52 kg / 118 lbs | ||
Questions about this speaker? Our pro audio team is here to help.