PD Series
SKU PD5122
The PD5122 is intended for use as a flown or ground supported, high power low frequency module used in conjunction with mid/high-only or full-range systems of the PD5000 and PD700 series.
| Overview | |
|---|---|
| |
| Specifications | |
| Size | 12" |
| Specifications | |
| Frequency Range (-10 dB) | 41 Hz to 1 kHz |
| Frequency Response (±3 dB) | 49 Hz to 300 Hz |
| Transducer Power Rating (AES) | 1600W (6400W peak), 2 hrs |
| Long-Term System Power Rating | 1200W (4800W peak), 100 hrs |
| System Sensitivity (60 Hz - 250 Hz) | 96 dB SPL, 1W @ 1m |
| Maximum SPL | 128 dB SPL cont avg (134 dB peak) |
| Input Modes | Drivers Parallel / Drivers Discrete |
| Nominal Impedance | 4 ohms in parallel-drive mode; 2 x 8 ohms in discrete drive mode |
| LF Driver | 2 x JBL 2206H 300mm (12 in) VGC drivers with 100mm (4 in) voice coil |
| Enclosure | Trapezoidal with 15 degree side angles, 16mm (5/8 in) exterior grade 11-ply Finnish birch plywood |
| Suspension Attachment | 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts not included, see optional accessories) |
| Finish | Black DuraFlex finish; white (-WH) available upon request |
| Optional Weather Resistant Versions | WRC for sheltered outdoor placement; WRX for direct exposure or extreme environments (tropical, beach, salt air, high humidity, rapid temperature changes) |
| Grille | Powder coated 14 gauge perforated steel, acoustically transparent foam backing (grille cloth backing on white units) |
| Input Connectors | Neutrik Speakon® NL4, plus CE-compliant covered barrier strip terminals, accepts up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs; Speakon in parallel with barrier strip for loop-through |
| Environmental Specifications | Mil-Std 810; IP-x3 per IEC529 (use WRC or WRX for higher ratings) |
| Dimensions (H x W x D, vertical orientation) | 375mm x 673mm x 706mm (14.8 in x 26.5 in x 27.8 in) |
| Optional Accessories | 229-00009-01 kit of three M10 x 35mm forged shoulder steel eyebolts |
| Mounting Information | |
| Net Weight | 36.4 kg / 80 lbs |
| Overview | |||
|---|---|---|---|
| |||
| Specifications | |||
| Size | 12" | ||
| Specifications | |||
| Frequency Range (-10 dB) | 41 Hz to 1 kHz | Enclosure | Trapezoidal with 15 degree side angles, 16mm (5/8 in) exterior grade 11-ply Finnish birch plywood |
| Frequency Response (±3 dB) | 49 Hz to 300 Hz | Suspension Attachment | 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts not included, see optional accessories) |
| Transducer Power Rating (AES) | 1600W (6400W peak), 2 hrs | Finish | Black DuraFlex finish; white (-WH) available upon request |
| Long-Term System Power Rating | 1200W (4800W peak), 100 hrs | Optional Weather Resistant Versions | WRC for sheltered outdoor placement; WRX for direct exposure or extreme environments (tropical, beach, salt air, high humidity, rapid temperature changes) |
| System Sensitivity (60 Hz - 250 Hz) | 96 dB SPL, 1W @ 1m | Grille | Powder coated 14 gauge perforated steel, acoustically transparent foam backing (grille cloth backing on white units) |
| Maximum SPL | 128 dB SPL cont avg (134 dB peak) | Input Connectors | Neutrik Speakon® NL4, plus CE-compliant covered barrier strip terminals, accepts up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs; Speakon in parallel with barrier strip for loop-through |
| Input Modes | Drivers Parallel / Drivers Discrete | Environmental Specifications | Mil-Std 810; IP-x3 per IEC529 (use WRC or WRX for higher ratings) |
| Nominal Impedance | 4 ohms in parallel-drive mode; 2 x 8 ohms in discrete drive mode | Dimensions (H x W x D, vertical orientation) | 375mm x 673mm x 706mm (14.8 in x 26.5 in x 27.8 in) |
| LF Driver | 2 x JBL 2206H 300mm (12 in) VGC drivers with 100mm (4 in) voice coil | Optional Accessories | 229-00009-01 kit of three M10 x 35mm forged shoulder steel eyebolts |
| Mounting Information | |||
| Net Weight | 36.4 kg / 80 lbs | ||
Questions about this speaker? Our pro audio team is here to help.