Free Shipping $50+
US Speaker — Professional Audio Components
jbl logoCBT/COL Series
JBL CBT 70J-1

JBL CBT 70J-1

SKU CBT 70J-1

The CBT 70J-1, with Constant Beamwidth Technology™, represents a breakthrough in pattern control consistency, utilizing complex analog delay beam-forming and amplitude tapering to accomplish superior, consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing typical of straight form-factor column speakers.

Item Price:$1,480.00
shopping_cartBuy Now
local_shippingFree U.S. Shipping on Orders $50+
Drivers4x 130mm (5 in), dual magnet neodymium, 38mm (1.5 in) voice coil, damped blended textile surround, coated diaphragm, shielded LF, 16x 25mm (1 in), dual magnet neodymium, encased magnet, coated diaphragm, shielded HF
Overview
  • CBT 70J-1 Two-Way Line Array Column with Asymmetrical Vertical Coverage
  • The CBT 70J-1, with Constant Beamwidth Technology™, represents a breakthrough in pattern control consistency, utilizing complex analog delay beam-forming and amplitude tapering to accomplish superior, consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing typical of straight form-factor column speakers
  • Combining Constant Beamwidth Technology with a physical J-shaped curve results in a well-controlled progressive line array with asymmetrical vertical coverage — a tighter pattern from the upper half of the array and a broader pattern from the lower half, sending more sound toward the far area of the room for more even front-to-back SPL levels than a traditional symmetrical column
  • The two-way coaxial design provides a wide 60 Hz – 20 kHz bandwidth
  • Vertical coverage is switchable between 45° (broad, medium-throw) and 25° (narrow, long-throw), and voicing is switchable between a flat Music mode and a mid-range presence-boosted Speech mode for clear, intelligible speech at long throw distances
  • Dynamic SonicGuard™ protection on the high-frequency section minimizes distortion at high drive levels by limiting driver excursion dynamically
  • The low frequency drivers are lightweight dual-magnet neodymium motors with 38mm (1.5 in) voice coils; the high frequency drivers use a dual-magnet neodymium structure for maximum sensitivity
  • Both driver types use coated diaphragm materials for moisture, UV, and salt resistance, and are magnetically shielded
  • The fiberglass-reinforced ABS cabinet, stainless steel external screws, and painted aluminum grille make the CBT 70J-1 suitable for outdoor installation (IP-55 rated with the optional MTC-PC2 panel cover)
  • A swivel (pan) / tilt wall bracket is included
  • Available in black or white (-WH)
  • Features:
  • Asymmetrical vertical coverage sends more sound toward the far area of the room for more consistent front-to-back sound levels
  • Sixteen 25mm (1 in) soft dome tweeters and four 130mm (5 in) high-power LF drivers, arranged coaxially
  • Patent-pending Constant Beamwidth Technology™ for constant directivity up to the highest frequencies, reducing out-of-coverage lobing
  • Vertical pattern coverage switchable between 45° (medium-throw) and 25° (long-throw)
  • Switchable voicing: flat response in Music mode, mid-range presence peak in Speech mode
  • Dynamic SonicGuard™ overload protection of HF devices
  • Swivel (pan) / tilt wall bracket included
Specifications
ComponentsFour 130mm (5 in) LF drivers, sixteen 25mm (1 in) HF drivers
Frequency Range (-10 dB)60 Hz - 20 kHz
Vertical Coverage — Narrow Mode25° (2 kHz - 16 kHz) (±10°)
Vertical Coverage — Broad Mode45° (750 Hz - 16 kHz) (±10°)
Horizontal Coverage150° (500 Hz - 8 kHz, ±20°)
Sensitivity — NarrowSpeech mode: 98 dB (1-8 kHz); Music mode: 93 dB (300 Hz - 18 kHz)
Sensitivity — BroadSpeech mode: 96 dB (1-8 kHz); Music mode: 92 dB (300 Hz - 18 kHz)
Nominal Impedance8 ohms; Min: 4.0 ohms @ 1kHz, 5.4 ohms @ 225Hz
Power Capacity (2-Hour)500 W (2000 W peak)
Power Capacity (100-Hour)350 W (1400 W peak)
Max SPL — NarrowSpeech mode: 125 dB cont avg (131 dB peak); Music mode: 120 dB cont avg (126 dB peak)
Max SPL — BroadSpeech mode: 123 dB cont avg (129 dB peak); Music mode: 119 dB cont avg (125 dB peak)
Low Frequency Drivers4x 130mm (5 in), dual magnet neodymium, 38mm (1.5 in) voice coil, damped blended textile surround, coated diaphragm, shielded
High Frequency Drivers16x 25mm (1 in), dual magnet neodymium, encased magnet, coated diaphragm, shielded
EnclosureFiberglass reinforced ABS cabinet, painted aluminum grille
ColorsBlack or white (-WH)
Outdoor CapabilityIP-55 rated per IEC529 with optional MTC-PC2 panel cover; UV, moisture, 200-hr ASTM G85 acid-air/salt-spray resistant
Insert Points10x M6 swivel (pan)/tilt (16mm deep) insert points on back panel
MountingIncluded swivel (pan)/tilt wall bracket: continuously variable ±80° left-right swivel, continuously variable ±15° tilt, plus 5° fixed increment points. Ten threaded mounting points conform to 127x70mm (5.0x2.75 in) OmniMount 60.0 pattern; can also be used for suspension
Dimensions (H x W x D)694mm x 170mm x 237mm (27.4 in x 6.7 in x 9.3 in)
Included AccessoriesSwivel (pan) / tilt wall bracket
Optional AccessoriesMTC-PC2 terminal panel cover; MTC-CBT-SMB1 stand-mount bracket (35mm speaker stand); MTC-CBT-FM2 flush-mount low-profile wall-mount bracket
Additional Specifications
Configuration2-Way
Mount TypeColumn
Mounting Information
Net Weight9.5 kg / 21 lbs
support_agent

Questions about this speaker? Our pro audio team is here to help.