Free Shipping $50+
US Speaker — Professional Audio Components
jbl logoCBT/COL Series
JBL CBT 1000

JBL CBT 1000

SKU CBT 1000

The CBT 1000 represents the next-generation in pattern control, expanding upon JBL's Constant Beamwidth Technology™.

Item Price:$3,075.00
shopping_cartBuy Now
local_shippingFree U.S. Shipping on Orders $50+
Drivers6x 165mm (6.5 in), lightweight neodymium motors, 50mm (2.0 in) voice coils, copper-capped pole tips, 16mm (0.63 in) long coil, damped blended textile surround, coated cones, magnetically shielded LF, 24x 25mm (1 in), neodymium, encased magnet and coated diaphragm for moisture/UV/salt resistance HF
Overview
  • CBT 1000: Constant Beamwidth Technology™ High-Output Two-Way Line Array Column with Adjustable Vertical Coverage & Tapered Horizontal Waveguide
  • The CBT 1000 represents the next-generation in pattern control, expanding upon JBL's Constant Beamwidth Technology™
  • Utilizing patented complex analog beam-forming, it provides superior and consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing typical of straight form-factor column speakers, combined with adjustable vertical coverage and a tapered horizontal waveguide for maximum versatility across a wide variety of listening spaces
  • The asymmetrical coverage settings produce a tighter pattern from the upper half of the array and a broader pattern from the lower half, sending more sound toward the far area of the room for more even front-to-back SPL levels
  • Vertical coverage is individually installer-adjustable through four "Pattern Up" and four "Pattern Down" coverage angles — sixteen total combinations, all without external DSP
  • The patent-pending Tapered Horizontal Waveguide provides continuously varying horizontal dispersion (very wide for short-throw, narrower for long-throw), delivering superior coverage in both the front and rear corners of a room
  • The two-way coaxial design provides a wide 45 Hz – 20 kHz bandwidth
  • At 102cm (40.2 in) tall and only 25cm (9.9 in) wide, the design fits well with virtually any architectural décor
  • A two-part swivel (pan)/tilt wall-mount bracket is included; fourteen M8 brass inserts on the back panel plus four each on the top and bottom end-caps provide installation versatility for suspension
  • CBT 1000 can be installed indoors or outdoors
  • Available in black (RAL9004) or white (-WH) (RAL9016)
  • Features:
  • Vertical pattern coverage individually adjustable with 4 "Pattern Up" and 4 "Pattern Down" coverage angles for 16 different combinations, without external DSP
  • Asymmetrical vertical settings send more sound toward far area of room for consistent front-to-back sound levels
  • Six 165mm (6.5 in) high-excursion LF drivers arranged coaxially with twenty-four 25mm (1 in) extra-high-power soft dome tweeters
  • Very high sound levels up to 131 dB (137 dB peak), depending on settings
  • Constant Beamwidth Technology™ provides constant directivity coverage and reduces out-of-coverage lobing
  • Patent-pending Tapered Horizontal Waveguide provides continuously varying horizontal dispersion, reducing over-splash
  • Wide 45 Hz - 20 kHz frequency response
  • Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode
  • Swivel (pan)/tilt wall bracket included
Specifications
ComponentsSix 165mm (6.5 in) LF drivers; twenty-four 25mm (1 in) HF drivers
Frequency Range (-10 dB)45 Hz - 20 kHz
Sensitivity (2.83V @ 1m)102 dB (highest setting: Point/Point, Speech, free space); 95 dB (lowest setting: Medium/Downfill, Music, free space)
Nominal Impedance4 ohms (4 ohms above 1kHz; 8 ohms below 800Hz)
Power Capacity1500W (6000W peak), 2 hrs; 900W (3600W peak), 100 hrs
Maximum Input Voltage65.0V RMS (2hrs), 130.0V peak
Max SPL — Highest Directivity, Speech131 dB cont ave, 134 dB cont program, 137 dB peak
Max SPL — Highest Directivity, Music127 dB cont ave, 130 dB cont program, 133 dB peak
Max SPL — Lowest Directivity, Speech128 dB cont ave, 131 dB cont program, 134 dB peak
Max SPL — Lowest Directivity, Music124 dB cont ave, 127 dB cont program, 130 dB peak
Pattern UP Settings (-6dB / -12dB @ 3kHz)Point: +7°/+12°; Tight: +9°/+15°; Narrow: +10°/+20°; Medium: +13°/+24°
Pattern DOWN Settings (-6dB / -12dB @ 3kHz)Point: -7°/-12°; Narrow: -10°/-20°; Broad: -17°/-28°; Downfill: -20°/-35°
Horizontal CoverageTapered Horizontal Waveguide, continuously variable: long-throw (top) 100°; middle 130°; short-throw (bottom) 160°
Recommended High-Pass35Hz, 24 dB/oct or greater
Low Frequency Drivers6x 165mm (6.5 in), lightweight neodymium motors, 50mm (2.0 in) voice coils, copper-capped pole tips, 16mm (0.63 in) long coil, damped blended textile surround, coated cones, magnetically shielded
High Frequency Drivers24x 25mm (1 in), neodymium, encased magnet and coated diaphragm for moisture/UV/salt resistance
EnclosureFiberglass reinforced ABS cabinet, powder coated 1050 aluminum grille
Outdoor CapabilityIP-55 rated per IEC529 with optional MTC-PC2 cover; exceeds Mil Spec 810 for humidity/temperature/UV; ASTM G85 acid-air/salt-spray (200 hrs)
ColorsBlack (RAL9004) or White (-WH) (RAL9016)
Insert Points14 individual M8 inserts on back panel (20mm deep), plus 4 each on top and bottom end-caps
MountingIncluded two-part swivel (pan)/tilt wall bracket: ±45° left-right swivel (at no tilt), ±15° tilt in 1° increments; 14 threaded points conform to 127x70mm (5.0x2.75in) legacy OmniMount pattern, plus 4 each on top/bottom end-caps; can be used for suspension
Dimensions (H x W x D)1020mm x 250mm x 345mm (40.2 in x 9.9 in x 13.6 in)
Net Weight (cabinet)24.5 kg (54 lb)
Shipping Weight38.6 kg (85 lb)
Included AccessoriesTwo-piece swivel (pan)/tilt wall bracket
Optional AccessoriesMTC-PC2 terminal panel cover; MTC-CBT1K-ACC1 kit (2x MTC-CBT-FM3 flush-mount brackets + 1x MTC-CBT-OS3 offset bracket); MTC-CBT-SUS3 suspension bracket kit
Additional Specifications
Configuration2-Way
Mount TypeColumn
Mounting Information
Net Weight24.49 kg / 54 lbs
support_agent

Questions about this speaker? Our pro audio team is here to help.